missing controls

missing controls

Postby Orlin » Mon Oct 21, 2013 10:16 pm

Hello,
I spent some time trying to get a stable setup in Window 7 64 bit:
- download and install the package from nubuilder.com

I created a new db and a few new tables.
And i am able to see the "Setup" when going to the site.

So at this moment i have a few concerns:
1. On the Forms tab, when trying to edit a form i am missing the "Refresh After Save" switch as in the wiki page below.
http://wiki.nubuilder.com/tiki-index.php?page=Forms%3A%20General&structure=nuBuilderDocs
2. Similar problem on the "System Setup" - missing the "Single Window Navigation"
At the same time i am getting lots of errors if PHP display errors is enabled.
Another question - how to access the Report Builder - can not see any button on the Setup page...

All of the above brings questions about of the quality of my setup - can you suggest a fix or is it normal....?
Orlin
 
Posts: 1
Joined: Mon Oct 21, 2013 9:44 pm

Re: missing controls

Postby massiws » Tue Oct 22, 2013 8:44 pm

Orlin,
1. Refresh After Save is always performed by nuBuilder: wiki page is outdated;
2. Default value for Single Window Navigation is YES (see here).
3. Display errors in php.ini MUST be set to Off.
4. Report Builder button is on the form where you can build your report: Setup > Add Activity > Report tab (see here).

Hope this helps,
Max
massiws
 
Posts: 503
Joined: Thu May 24, 2012 9:38 am
Location: Milan, Italy


Return to Installation



cron